Drones provide new perspective on job sites

When PCL Construction needed to assess the condition of an Edmonton rooftop in mid-winter, they chose an alternative approach. “Instead of sending somebody up there to walk on the roof in icy conditions, we flew a UAV (unmanned aerial vehicle) over the roof and sent the video to the consultant,” says Mirra Maheden, senior virtual construction specialist for PCL. The video provided the necessary overview, and also allowed the consultant to zoom in on various details in order to complete the assessment.

UAV or drone adoption is one of the fastest growing uses of technology in construction, and inspecting icy rooftops is only one of many emerging applications leading to safer jobsites, better dissemination of information, and in some cases, precise measurement.

“We started looking into this about two years ago, and we’ve been using UAVs on project sites for about a year now,” says Sonny Shem, virtual construction manager for PCL. “It’s gone from discussing what we could do with drones, to actually getting out there and flying and capturing data.” PCL currently has a dozen pilots trained to fly drones effectively and in accordance with legal requirements.

The most common application, says Maheden, is relatively straightforward – progress videos, typically updated on a weekly basis, that give stakeholders a “big picture” view of how a job is progressing. “Videos allow managers to see the progress of the site from an aerial view, so they can assess which areas are progressing or lagging and compare that with their planning schedule. They can also send the video to clients, or prospective clients or tenants.”

Flight videos taken on drone flights are also used to identify hazards on jobsites, and to provide documentation for compliance with environmental regulations. “EllisDon does a lot of projects with local governments, and there are guidelines for maintaining clean jobsites and handling materials in an environmentally friendly way,” says Stantton Pallister, geomatics manager at Alberta-based PME Inc., a heavy civil contractor owned by EllisDon. “Drones allow us to keep a clear photographic record of the site.”

While providing viewers with an aerial perspective is the most common use for drones, it is not the only one. “Different kinds of cameras and devices can be attached to the drone for different applications,” says Pallister. “For example, when a building is complete, we can fly a drone around it with a thermal imaging camera, and look for heat leaks.” Other technologies include magnetic imaging, laser imaging, and GPS data.

Perhaps the most powerful application is the use of drone-collected data in virtual 3D models of construction projects. This provides a common view of the site for people throughout the organization, and allows supervisors, construction managers, and senior managers to discuss projects from the same vantage point. “The 3D models that are generated from our drone flights provide a perspective that amazes many of our customers, compared to what they are used to looking at,” says Pallister.

Drones can also be used for measurement purposes. One of the most advanced applications comes from mining: the use of drones in early stages of a project to create and update accurate geographic models, allowing contractors to measure quantities of earth, gravel, and other aggregates.

“At PME, one of the ways we get paid, is for how much earthworks material is moved at a jobsite, so we developed a process where we can use the drone to measure volumetric quantities of earthwork stockpiles on jobsites,” says Pallister. “We measure accurately to the cubic metre, and provide that to the construction team for progress billing.” The method, Pallister points out, is superior to traditional methods, such as counting truckloads. “We’re more accurate, and this adds up to substantial savings.”

Assessing the options

Thanks to the introduction of drones to the consumer market, prices have plummeted in the past three years, giving contractors a range of choices. “We’re using everything from prosumer UAV to commercial devices – it depends on the application,” says Shen. “If we’re just taking a quick video, we might use a prosumer type drone. If we’re actually mapping the terrain, we’ll need a higher end drone with a better sensor and a better camera system.”

Collecting the data, however, is only the beginning. Captured data is typically stored in the drone on memory cards, and are then uploaded to the cloud, where it is either made available as video, or processed in formats suitable for BIM programs and other 3D apps. Integration, always a challenge, is particularly daunting given the file sizes, which ranges from 4 – 6 GB from a typical flight.

For organizations that aren’t interested in purchasing or learning to operate drones, there are companies like Menlo Park, Calif.-based technology provider Kespry, which offers an all-inclusive, end-to-end solution. Clients pay a subscription fee for a complete package, which includes access to fully-equipped drones, data collection tools, and cloud-based processing facilities that allow the data to be delivered to construction applications in 30 file formats. Kespry’s software flies the drones based on defined missions, so there is no need to train pilots.

“We take care of all the steps for contractors that need to collect accurate, reliable data, but don’t want to be in the drone business,” says David Shearer, vice-president marketing for Kespry. In addition to AEC (Architecture, Engineering, Construction), the company provides solutions for aggregates and mining, and the property claims insurance industry in Canada.

One of the key requirements for drone use is keeping compliant with regulations. UAVs were unregulated in Canada until fairly recently, but are now considered aircraft and are covered under the Canadian Aviation Regulations (CAR). Restrictions include allowable flying altitudes, maintaining visual contact with the drone, and avoidance of no-fly zones such as populated areas and airports.

The regulations are extensive, and operators at the very least need to become thoroughly familiar with them, and in many cases, apply for a Special Flight Operations Certificate (SFOC). “We have seen the regulations get very complicated,” says Shem. Organizations may be required to carry special liability insurance as well.

Looking ahead

The rapid expansion of drone use in construction is not slowing down. PCL is working on expanding its capabilities for developing 3D point clouds for bringing data into its 3D modeling systems. “We’re just scratching the surface of where this can go,” says Maheden.

Pallister’s team is working on incorporating GIS data in their mapping operations. For example, PME plans to fly drones in built-up urban areas to identify and locate terrain features such as lamp posts, fire hydrants, mail boxes, and power lines – all of which are currently captured through ground observation. The information will then be shared with municipalities for urban planning, or to estimating teams. “When we’re looking at job pursuits or pre-construction work, we’ll be able to be more predictive for our planning and our costing,” says Pallister. “We’ll know what the ground features look like before we begin the project.”

Progress, however, isn’t just about improving the technology – contractors have much to gain from applying technologies that already exist. “It’s important that this is used in a wider perspective,” says Shem. “When you’re on a construction site, you don’t actually get to see the whole progress that’s taking place. We can show a progress video to a project manager that’s been on a site for two years, and they tell us they’ve never seen the project from that perspective.”

“When we share these videos with the trades on a project, they get to see things they don’t normally see,” says Maheden. “That helps them become more engaged and thus take pride in their own work, and helps us enhance the teamwork on site.”

Jacob Stoller is a principal of Toronto-based StollerStrategies. Send comments to editor@on-sitemag.com.
Read the original article here: http://www.on-sitemag.com/features/drones-provide-new-perspectives-jobsites


May 16, 2017

Digital transformation in the real estate industry

While digital transformation has disrupted almost every type of business, the real estate industry has been traditionally slow to move with the times – until now, according to participants at a recent 2nd Asia Pacific Leadership Symposium in Hong Kong organised by the Urban Land Institute (ULI) and by the World Economic Forum (WEF).
Read More
May 15, 2017

Trust-based teams build better

Award-winning author and futurist Rex Miller says the way most construction projects are carried out now drives good people to do bad things.
Read More
conezonebc.jpg
May 15, 2017

VPD Steps Up Enforcement in Support of Roadside Worker Safety

The B.C. Cone Zone Campaign coincides with the increase in roadside work throughout the province in the warmer months of the year. In the City of Vancouver, major road construction and repair projects will be as much as 25 percent greater than the same period in 2016.
Read More
modular.jpg
May 05, 2017

Manufacturing is shifting the future of construction

The future of design and construction is about finding efficiencies and building a faster, cheaper and better quality product. Design for manufacture and assembly (DFMA) incorporates all those elements under one roof, stated several industry experts during a recent presentation on the future of modular construction.
Read More
May 02, 2017

Lean construction: More than common sense

Lean is far from the novel concept it was back in the ‘50s when Toyota first popularized it. Yet, here we are in 2017, and a new lean event, whitepaper, seminar, book, association, or video seems to pop up everyday.
Read More
eNews - CKNW.jpg
April 30, 2017

CKNW Future of Work Series: The future of Construction

According to the B.C. Construction Association, by the year 2025, there will be 15,000 unfilled construction jobs throughout B.C. As an older generation of workers start to head into retirement, younger workers will be needed to fill the roles and keep the industry thriving.
Read More
lumber.jpg
April 27, 2017

Trump Imposes Tariffs up to 24% on Canadian Softwood Lumber

Softwood lumber, often used for structural framing and decking, among other uses, may be seeing a price increase in the US in the near future. On Monday, the U.S. Department of Commerce (DOC) has announced that they will be imposing tariffs of up to 24% on all softwood lumber imported from Canada.
Read More
April 27, 2017

Robotic fabricator could change how buildings are constructed

Back in the 1970s, robots revolutionized the auto industry doing a wide range of jobs more reliably and quickly than humans. Before long people were touting robotics for use in construction. But a construction site is a complex place posing unique problems, which is why fabrication of complex elements is sometimes done off-site.
Read More
DJI_00151-533x400.jpg
April 26, 2017

Drones provide new perspective on job sites

UAV or drone adoption is one of the fastest growing uses of technology in construction, and inspecting icy rooftops is only one of many emerging applications leading to safer jobsites, better dissemination of information, and in some cases, precise measurement.
Read More
Riskchart1.jpg
April 26, 2017

Future disruption and the race to collective intelligence

If ever there were an industry ripe for disruption, it is construction. Mega-trends like globalization, asset management, and new technology are beginning to turn this long unchanged industry inside out. So, how do industry players stay on the winning side of future disruptions?
Read More
April 20, 2017

6 Tips for Stressed Out Superintendents

More than any other construction pro, the superintendent is the closest to a jack-of-all-trades. Besides needing to recall vast amounts of technical information at a minute’s notice, you also have to stay one minute ahead of a rapidly changing environment.
Read More
drywallsupport.jpg
April 20, 2017

Drywall Support Program commences on May 1

The Government of Canada is providing relief to Western and Northern Canadian drywall contractors and builders who faced unexpected losses due to the duties imposed on imported drywall from the United States.
Read More
PM-CCA.png
April 19, 2017

CCA project management guide aims to be all-inclusive

A task force on project management services delivery is in the final stages of developing a guide that aims to shed some light into how stakeholders involved in a project can interact with project management (PM) firms and what roles and responsibilities those involved have.
Read More
April 16, 2017

E-gloves aim to protect workers from vibrations

You might find it doubtful that a new sort of work glove, no matter how "smart," is capable of protecting construction workers from dangerous vibration levels. But the magic word nowadays is "sensors." They are in your phone, in your car, in your home humidifier, in all sorts of devices.
Read More