3D-printing bringing "impossible" designs to life
When Janjaap Ruijssenaars revealed his Landscape House design to the world, everyone went nuts. The Dutch architect’s proclamation that his visionary building would be 3D printed made international headlines, as did the shape it could take thanks to 3D-printing software — an M. C. Escher–esque infinite loop; a house with no beginning and no end; a Möbius strip curling in perpetuity. “For me personally, what is most exciting about 3D printing is freedom of form,” Ruijssenaars tells OZY from his home in Amsterdam, a city that has embraced the communion of architecture and 3D printing with gusto (see last year’s micro canal house by DUS Architects, printed from bio-plastic and plonked in Amsterdam-Noord).
Ruijssenaars cuts to the heart of what makes 3D printing truly revolutionary: not merely the giddy futurism of conjuring anything you please out of thin air, but the fact that it liberates design. Ruijssenaars’ “freedom of form” means we can now produce things that previously were impossible to make. And that could change, well, everything.
“We have hit the threshold of what is capable with the old techniques,” asserts Joshua Mook, engineering manager for additive technologies at GE Additive (additive is another term for 3D printing, as the process makes objects by adding material, rather than subtracting it). Based in Cincinnati, Mook is the guy who designed the 3D-printed fuel nozzle — cheaper, lighter and more durable than anything before it — for CFM’s best-selling LEAP jet engine. In his own words, he is now an additive “evangelist.” Mook and his team are at the forefront of the additive revolution, working with a range of companies to help them revolutionize the design of their products through additive.
“Think of the fantastical contraptions you imagined as a child,” he says. “As you grow up, you unlearn that creative side of design [to be practical]. But additive is opening that back up. All those ideas we’ve suppressed because they can’t be manufactured are back on the table.”
Take building a table. Traditional manufacturing has you connect the different parts — the tabletop and the legs — at right angles. These unnatural, forced connections are weak points in the design. But manufacture a table with additive and a table leg can grow organically from the tabletop, in a sort of arch, so the two are inseparable; there are no parts, just one shape. In a design like that, “no point is more prone to failure than any other point,” Mook notes. “It’s much more efficient.”
[text removed for relevancy; view the original article here]
Ruijssenaars and his firm, Universe Architecture, are yet to realize Landscape House, though he printed a bench in the same shape last year. He is now working with Spanish infrastructure conglomerate Acciona and construction group BAM to bring it to life. Despite the delay, Ruijssenaars thinks 3D printing will be commonplace in construction within the next decade: “People like it, and it’s too fun not to explore every corner of it,” he says. Like Asfour, he notes there’s much to be done on material: “Light and superstrong is, I think, the ultimate material innovation.”
The Landscape House has yet to be realized, but architect Janjaap Ruijssenaars has 3D printed a bench in the same shape. [Image courtesy of Universe Architecture]
The technology, however, is evolving rapidly.
“If you told us five years ago that 35 percent of a jet engine we made would be additive, there’s no way we’d have said that’s possible,” says Mook. He’s not worried about 3D printing’s technological process (“That’s just a matter of time,” he says). The holdup, he says, is people.
“The No. 1 challenge we face today is the engineers and the designers accepting the technology. And it’s not because they don’t want to — it’s more they’ve been trained not to accept that way of thinking.” He explains GE is tackling that by “uneducating” engineers, pairing up additive newbies with converts to work on designs and “strip out everything they once knew.”
And if they can do that, they can do anything. “I haven’t found an industry yet where it doesn’t move the needle,” Mook reckons, predicting it will change everything from cars to kitchen appliances to how we generate power. He explains that the old paradigm of design is taking three desirables — cost, performance and speed — and attempting to allow for two. Additive, he notes, gifts you all three. Mook says that could allow for incorporating aerospace technology into cars — something that today is “cost-prohibited” but could make them “lighter, faster, better.”
When it comes to the possibilities, Mook says, “we’re only limited by how creative people can be.”
Read the original article here: http://www.ozy.com/fast-forward/the-new-tech-bringing-impossible-designs-to-life/79073
Historically high housing starts for Metro Victoria
Engineers Canada seeking nominees for its annual awards
VICA members' generosity supports families in the communities we work and live in
Happy Holidays from VICA!
Knappett Industries wins Deputy Minister’s Contractor of the Year Award
VICA Member MNP LLP to merge with Hulko Cameron Wellburn LLP
VIHA one of seven to win BCCA's Award for Excellence in Procurement
Defence Construction Canada Comox Procurement Team recognized for procurement excellence
The Unsung Heroes of Public Sector Construction
Ledcor recognized for having one of Canada’s most admired corporate cultures, again
How can we get on top of fraud in the construction industry? [Excerpt]
4 Construction and Infrastructure Stocks That Could Soar in 2018 [Excerpt]
PCL among leaders sleeping on the street for homeless youth [Excerpt]
One-quarter of B.C.’s young construction workers are putting their hearing at risk
Government of Canada kicks off the Smart Cities Challenge
Waymark Architecture walks away from the 2017 EcoStar Awards a winner
Victoria Airport Authority wins 2017 EcoStar Award for Ecological Stewardship
Zuzana Capeau steps in as STEP's new Regional Employment Placement Specialist
Member News: Rob Tournour Masonry, Another Brick in Nepal
The Future of the Industry: Nov 5-11 is Apprenticeship Recognition Week in BC
Member News: RJC Engineers aka Read Mos Christofferson this Movember
VICA Members in the Community: Butler Brothers' Book Prize
BECOME A MEMBER TODAY!
The construction industry is a dynamic and exciting realm that faces both unique challenges and extraordinary opportunities. By joining VICA, you not only build your business, but you also build up the industry you're proud to be a part of.JOIN NOW